DC constant power supply 2x 0...30V/0...10A w/dig. display, blue illum. (42 PU)
Microcontroller-controlled DC power supply 2x 0-30 V / 0-10 A (320 W)
Compact power supply for all basics and advanced experiments in the areas of electrical engineering / electronics and digital technology. The device is fully insulated and supplies safety extra-low voltage in accordance with EN 61010. All outputs are equipped with self-resetting fuses that safely switch off an overcurrent without having to replace a fuse. The device is therefore particularly safe, maintenance-free and particularly suitable for beginners. Modern technology ensures low energy consumption and reduces power loss. The device only requires a 1-phase power supply. It is a built-in device that can either be integrated into an energy channel or installed in a table housing and thus becomes an external device.
- 2 x outputs 0-30 V/ 0-10 A
- Safety sockets
- Switch-mode power supply
- Overvoltage protection (OVP)
- Overtemperature protection (OT)
- Network-capable (interface)
- Incl. software for monitoring and control operations
- 2 four-digit displays (1x per channel) for current and voltage
- Convection cooling
- Safety in accordance with EN 60950
- Auto adjustment of current and voltage to maximum load
- Dimensions: 3 HU/42 PU
Technical data:
Input voltage:
- 90-264 V/ 45-65 Hz
- -Power factor: >0.99
Output voltage:
- 2 x 0-30 V
- -Stability at 0-100% load: <0.15%
- -Stability at + 10% DUIn: <0.02%
- -Ripple BWL 20MHz: <80 mVpp/9 mV RMS
- -Recovery time 10-100% load: <1 ms
- -Accuracy: <0.2%
- Output current: 0-10 A
- -Stability at 0-100% DUOut: <0.05%
- -Stability at +10% DUIn: <0.15%
- -Ripple: <25 mApp/9 mA RMS
- -Accuracy: <0.2%
General
- Efficiency: 85%
- Output power: 320W (2x160W)
- Protection class: I
- Weight: 2.4kg