SybaNet control unit 4.0 with touch panel and Lab Manager software, 42 PU

SybaNet control unit/touch-panel PC, for control and monitoring of classrooms or laboratories. All functions controlled and monitored via (master) touch panel via accompanying (Lab Manager) software.
All switch states for the various student workstations can be graphically displayed (user menu). Configuration and log-in from the various workstations are also implemented via the touch panel (admin menu).
In addition, different configurations can be set up for various users using the software.
Users themselves can apply any available updates detected by the system itself directly via a USB port on the front control panel.

Software features:

• Software for administration of complete (network) lab 
• Organisation into admin and user menus
• Password protected access to menus
• Graphic set-up and bird’s-eye views for labs (room configuration)
• Work stations can be controlled individually, in groups or all together
• Work stations can be enabled individually, in groups or all together (low-voltage, AC or three-phase)
• Equipment can be individually enabled or disabled at the various student workstations
• Time limit for activation of power-supply voltages by means of timer function
• Additional remote control for various lab network and signal equipment
  • A graphic user interface allows specific equipment to be selected and parameters to be configured
  • It is possible to pre-set, limit or monitor various voltages and signals for different pieces of equipment
  • Inserts (plug-in units) can be controlled directly. This means that individual students or groups of students can have specified signals provided for the signal generator, DC
    outputs or three-phase generator. Optionally it is possible to block the option for students to configure certain equipment
    themselves.
• Graphic display of all functions for the various workstations, such as switch states etc.
• Emergency shut-down display including station recognition
• RCD (FCCB) trip detection with graphic visualisation including detection of workstation where the trip occurred
• Display of overloads, e.g. after a short-circuit
• Control of automatic table/power duct lowering mechanism
• Software automatically detects connected devices
• Timed enabling via countdown timers with optional cut-off (e.g. for measurement exercises or examinations)

Technical data for hardware:

• Full-function embedded PC system with licensed Linux operating system
• CPU: i.MX6Q, 1 GHz
• Memory: 1 GB DDR3 RAM, 4 GB eMMC Flash, 512 kB SRAM
• Display: 7.0" 5:3, TFT-TN, 800 x 480, 262K, LED 400 cd/m², 40,000 h
• Touch panel: 4-wire resistive, N/A
• Interfaces: 1x USB 2.0 OTG, 1x USB 2.0 host, 1x Ethernet 100 Mbits/s, 2/2 digital I/O,
  HDMI, 2x RS-232, 1x RS-485, 1x CAN, 16 GP I/O, 1x SD card, 1x speaker, 1/1 audio I/O1x
• Additional ports: RTC, CAN/RS485 galv. isolated
• Operating temperature: 0...60 °C
• Power supply included: 9...30 VDC

Special features:

• Automatic daily master-system restart, adjustable from admin menu for freshening RAM
• Automatic daily client-system restart, adjustable from admin menu for freshening RAM
• No extra/external PCs needed for student workstations or teacher's desk
• Update function with detection by system itself when update USB stick is plugged in
• Possibility of enhancement for system by adding a tablet PC (Android) with parallel operation of system via WiFi and accompanying app