SybaPro corner table 800x800x760mm (with rear support foot)

Table top with slanted side and rear aluminum profile support foot, for building corner combinations in the SybaPRO system for laboratory tables with a depth of 800mm.

Table top:

• Highly-compressed 30mm-thick multi-layered fine chipboard conforming to German Industrial Standard (DIN) EN 438-1
• Colour grey RAL 7035, slightly textured 0.8mm-thick coating on both sides conforming to German Industrial Standard (DIN) 16926
• The border of the table top is a solid, impact-resistant protective trim made of 3mm-thick grey RAL 7047 coloured plastic
• The coating is resistant to a wide variety of chemicals and reagents such as dilute acid and alkaline solutions. Furthermore it is heat resistant, to liquid solder or the hot spots resulting from soldering irons and lit cigarettes, for example.
• Sturdy, continuous rectangular-tube frame with approx. 0.8µm-thick acid-resistant epoxy resin coating

Support foot:

• 8 identical grooves in the extruded aluminium profile (3 grooves on each broad side and 1 on each narrow side)
• Grooves for mounting standard industrial brackets
• Two separate internal cable channels for wiring
• With supporting leg at the rear

Dimensions:

• Height of table top 760mm
• Dimensions edges 800x800x600mm (side x side x front)
• Dimensions overall 1224x760x1224mm (w x h x d)