Elect. height-adjustable desk SybaPro, 2000 x 640 -1300 x 800mm

The electrically height-adjustable desks from the SybaPro series are the ergonomic workplaces of the future and feature lots of advantages.
By adjusting the table height, the person at work is less subject to fatigue and is able to focus and perform better.
Being able to stand up while working also improves reaction speed, boosts alertness and alternating between standing and sitting also trains the back and leg muscles.
This also provides relief to the spinal column and stimulates circulation.
The height value of the digital display can be set and displayed in inches or centimeters. The height value can be changed to the actual table height if this has changed, e.g., due to leveling or table supports, etc.
The height adjustment range of the table can be limited upwards and downwards. New limits may be necessary if objects above or below the table could collide with the table.

Table frame:

• Table frame made of high-quality steel
• C-shaped table frame with lifting columns slightly offset to the rear for:
  • more leg space
  • well-designed for centre of gravity with a combination of training equipment like power ducts or training panel frames
  • maximum stability and avoidance of tipping over
• Frame is powder coated silver (similar to RAL9006)
• 2 synchronised lift columns incl. motors 
• Fastening option in the foot extensions for stationary assembly of the tables (incl. screws, washers and dowels).

Operating element:

• Illuminated hand-held touch-activated control with soft start/stop and memory function
• Digital height indicator display
• 3 memory settings to specify pre-defined heights

Tabletop:

• 30mm tabletop made of highly compressed, multi-layered fine chipboard conforming to DIN EN 4387035, grey coloured, RAL7035
• Slightly textured laminate coating (Resopal) conforming to DIN 16926 on both sides
• Resistant to many chemicals and reagents, such as dilute acids and bases
• Resistant to heat, e.g. liquid solder and point heating caused by soldering irons
• Edged with solid, impact-resistant protective edging made of 3mm thick, coloured plastic, RAL7047
• Coatings and adhesive are PVC-free

Technical data:

• Electrical height adjustment from 640mm– 1300mm = 660mm stroke
• Adjustment speed 40mm/s
• Motorised operation performed by 2 synchronised electric motors with soft start / stop functions
• Weight-bearing capacity 125kg
• Low operating noise level < 55dB
• Power connection terminal 220V-240V via Euro plug
• Minimised and almost undetectable power consumption during standby operation

Dimensions:

• Dimensions 2000x640-1300x800mm (w x h x d)