EGP 2 Generator differential protection

EGP 2 Generator differential protection

Training contents:

  • Calculating protection operating values
  • Fault recognition within the protection range
  • Testing tripping and reset for faults occurring inside and outside the protection range
  • Disconnection and de-excitation of the generator
  • Measurement of the operating (pick-up) currents of the protection device for symmetrical and asymmetrical faults
  • Comparison of measured values to set values

Weboffer

 0 Article
Equipment set / product

Supplement to basic set, consisting of:
1
Transformer / Generator differential protection relay with time over current protection
 Transformer / Generator differential protection relay with time over current protection CO3301-4M
Additionally required, dynamic servo machine test stand:
1
Servo machine test stand for 1kW machines incl. software ActiveServo (D,GB,F,E)
 Servo machine test stand for 1kW machines incl. software ActiveServo (D,GB,F,E) CO3636-6Y
1
Rubber coupling sleeve for 1kW machines
 Rubber coupling sleeve for 1kW machines SE2662-6A
1
Coupling guard with LED lighting for 1kW machines
 Coupling guard with LED lighting for 1kW machines SE2662-7D
Media:
1
Interactive Lab Assistant: Generator protection
 Interactive Lab Assistant: Generator protection SO2800-3U
Software:
1
Software SCADA Viewer
 Software SCADA Viewer SO4001-3H
1
Patch cable Cat5E 1x 1 m yellow, 2x 2 m yellow
Patch cable Cat5E 1x 1 m yellow, 2x 2 m yellow LM9057
1
USB 2.0 Ethernet adapter, 10/100
USB 2.0 Ethernet adapter, 10/100 LM8257
1
5-Port Ethernet Switch
5-Port Ethernet Switch LM9988
Power supply:
1
Three-phase power supply with motor protection switch
 Three-phase power supply with motor protection switch CO3212-5V
1
Motor protection switch, 3 pole, 1.8-2.5A
 Motor protection switch, 3 pole, 1.8-2.5A CO3212-1P
1
Exciter voltage controller with de-excitation
 Exciter voltage controller with de-excitation CO3301-5G
1
Multiple socket outlet, 6 fold, with illuminated switch
Multiple socket outlet, 6 fold, with illuminated switch ST8010-4J
Measuring instruments:
1
HMI (Human Machine Interface) for generators
 HMI (Human Machine Interface) for generators CO3301-5L
Accessories:
40
Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R
2
Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V
2
Safety connecting plug 4mm with tap (2x), gr/ye, 1000V/32A CAT II
 Safety connecting plug 4mm with tap (2x), gr/ye, 1000V/32A CAT II SO5126-3W
1
Set of safety measurement cables, 4mm, 31 pcs
 Set of safety measurement cables, 4mm, 31 pcs SO5148-1L
1
SybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm
 SybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm ST7200-7A
1
Protected power distribution for working stations
 Protected power distribution for working stations ST8008-8N
Additionally recommended:
1
Monitor holder for flat screen monitor of weight up to 15kg/33lbs
 Monitor holder for flat screen monitor of weight up to 15kg/33lbs ST8010-4T
1
Keyboard adapter for flat screen monitor holders
 Keyboard adapter for flat screen monitor holders ST8010-4G
1
Display for Power Generation equipment
 Display for Power Generation equipment ST8000-4J
1
ST7200-5L