Skip to content

Energy-Savings Drives Using Frequency Converters 300W

RXLea
Digital projects for hands-on learningInteractive learning content, directly connected to the training system.

Energy-Savings Drives Using Frequency Converters 300W

EEM13PT-300W

PanelTrain bench-top system for energy-efficient drives with variable frequency drives (VFDs): learners parameterize a Sinamics G120, run an IE3 motor at variable speed and measure the savings compared with direct line operation.

Learning Content
  • Controlling the drive to match demand
  • Interpreting characteristics
  • Optimizing operating points
  • Determining efficiencies
KEY FEATURES
  • Using industry-standard VFD hardware
  • Emulating real driven machines
  • Working safely on rotating machines
  • Analyzing motor and load behavior in real time
Speak with a Product Specialist +1 (757) 808-5696 · sales@lucas-nuelle.com

A large proportion of industrial electrical energy goes into drives. Many applications, such as fan systems, do not run permanently at full load, so needs-based electronic speed control noticeably reduces operating costs. For this purpose, the training system combines a 0.37 kW energy-efficient motor with the Sinamics G120 industrial VFD (0.75 kW), prepared for teaching, and the servo machine test system, which emulates a fan load. Learners commission the VFD, store fixed speeds, work with linear and quadratic V/f characteristics and measure the power consumption. Finally, they compare the operating costs of the controlled drive with those of direct line operation.

CO3636-5NSinamics G120 frequency converter, 0.75 kW, 200-240V single-phase feed-in, PROFINET
CO3636-5VBrake resistor 0.2kW for frequency converters
SE2683-1NEnergy-efficient motor, 0.37kW
SO2805-1JInteractive Lab Assistant: Energy efficient drives
CO3212-5VThree-phase power supply with motor protection switch
CO5127-2APower-Multimeter
CO3636-6XDynamic servo machine test system for 0.3kW machines incl. software ActiveServo
SE2662-2ARubber coupling sleeve, 0.3kW
SE2662-7CCoupling guard with LED lighting for 300W machines
CO3212-1WCut-out switch, 4 pole
ST7200-7ASybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm
ST8010-4TMonitor holder for flat screen monitor of weight up to 15kg / 33lbs
ST7200-5LProtection cover for three-level experiment trolleys
ST8010-4GKeyboard adapter for flat screen monitor holders
ST8008-8NProtected power distribution for working stations
ST8010-4JMultiple socket outlet, 6 fold, with illuminated switch
ST8000-5ADisplay for Electrical Machines equipment
SO5148-1LSet of safety measurement cables, 4mm (31 leads)
SO5126-3RSafety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3VSafety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3WSafety connecting plug 4mm with tap (2x), green/yellow, 1000V/32A CAT II

Learning Content in Detail

Learners commission a variable-speed drive, parameterize it for changing requirements and evaluate the gain in energy efficiency.

Controlling the drive to match demand

Learners parameterize the VFD for linear and quadratic V/f characteristics and adapt the air volume flow to changing requirements.

Interpreting characteristics

Learners record torque-speed characteristics at various fixed speeds and compare the operating behavior of the motor.

Optimizing operating points

Learners superimpose the recorded motor characteristics on emulated fan characteristics and determine the corresponding steady-state operating points.

Determining efficiencies

Learners measure the electrical power consumption in variable-speed operation and calculate the efficiency of the VFD and motor.

Calculating savings potential

Learners determine the operating costs of the controlled system, compare them with direct line operation and assess cost-effectiveness.

Features & Applications

The experiments address tasks from building automation, industrial drive technology, and maintenance and plant optimization.
  • Using industry-standard VFD hardware — The system incorporates the Sinamics G120 industrial VFD, prepared for teaching. Through parameterization, learners unlock the savings of variable-speed operation.
  • Emulating real driven machines — The servo brake system simulates driven machines such as fans. Learners investigate the drive behavior with these realistic load profiles directly in the lab.
  • Working safely on rotating machines — The hardware includes plug-on shaft covers with electronic monitoring. This allows learners to work safely on rotating machines.
  • Analyzing motor and load behavior in real time — The servo machine test system records all mechanical and electrical values and displays them live on the PC. Learners superimpose the recorded motor characteristic on the characteristic of the emulated driven machine and read off the operating point of the drive.
  • SINAMICS G120 variable frequency drive — The 0.75 kW VFD and the associated braking resistor (0.2 kW) are integrated into the system in a form prepared for teaching. This enables learners to commission the drive themselves and parameterize it for variable-speed operation.
  • Energy-efficient motor 0.37 kW — Built on the basis of IE3, the motor achieves an efficiency of 80.4%. Learners use it to demonstrate the economic potential of modern motor technology.
  • Servo machine test system — A digital control unit, an induction servo motor acting as an active brake and the ActiveServo software make up the test system. Learners operate the drive in four-quadrant mode and simulate up to 10 industrial driven machines such as fans, pumps or flywheel masses.
  • Power multimeter with touch display — The instrument measures voltage and current independently of the waveform and calculates real, apparent and reactive power in real time. It captures even the pulsed signals of the VFD accurately. Learners transfer all measured values to the PC via USB.
  • Tool-free coupling of test object and test system — A coupling sleeve with an internal ring gear connects the motor and brake free of backlash and with vibration damping, entirely without tools. The plug-on shaft cover switches off the supply voltage as soon as it is removed during operation. LEDs indicate the safe system status.
  • STARTDRIVE parameterization software — Learners use the industrial software to configure the VFD. They assign fixed speeds and set the system to a demand-based air volume flow.
  • ActiveServo software — The software offers three views for machine analysis. Learners record motor characteristics under speed or torque control, define ramp functions and emulate eight driven machines. They determine the static operating point and record the starting behavior in high resolution.
  • Interactive Lab Assistant (ILA) — The multimedia course guides learners step by step through the payback calculation. Learners answer questions on the IE classes and document their evaluations digitally.
Learners working with RXLea on a tablet at a Lucas-Nuelle training system
RXLea

From Knowledge Comes Capability.

You guide the learning

Where theory and practice go hand in hand.

RXLea brings a new way of learning: project-based, hands-on and clearly structured. Learners solve real-world tasks, while instructors save time on preparation. Interactive modules, smart analytics and real hardware create a modern, efficient learning world.

Hands-on and interactive

Animations, interactive tasks and realistic scenarios build a deep understanding. All content is organized into clear learning paths for focused, hands-on learning.

Digital support

3D assembly animations and digital instructions simplify complex procedures, reduce errors and help learners work more independently.

Visual support

Overview graphics, screenshots and sample animations make the learning world transparent. Photos from the learning packages are also available, including country-specific versions where needed.

Learners using a tablet at an energy training system
RXLea on desktop, laptop and tablet
RXLea Path Creator for building learning journeys
RXLea Navigator showing the learning world
Learn more about RXLea
Newsletter

Stay ahead in
technical training.

Get the latest training systems, product launches and educational insights, delivered directly to your inbox.

Your email address

By subscribing, you agree to our Privacy Policy. You can unsubscribe at any time.

 Please select at least one category before subscribing.
I'm interested in - select all that apply