Tool trolley for automotive systems (236 tools)

This tool trolley is the perfect supplement to your training workshop. The tools it provides enable you to obtain the best results in any application or situation. The high quality of all the components allows you to carry out work in relaxed and professional fashion. A detailed listing of the individual tools (all 236 of them) follows below:

• Tool and assembly trolley with 6 drawers
  • 6 Drawers with central locking
  • Height of front drawer panel 100 mm
  • Each drawer can carry at least 35 kg of weight
  • Drawers can pull out 100% of the way when pulled out fully
  • Ball bearings and protection against falling out
  • Handle with replaceable labelling strips and clear covers
  • Central locking and push button for unlocking individual drawers
  • Individual locking – definitely no more than one drawer can be opened at a time, ensuring the trolley is at no risk of tipping over
  • Interior dimensions of drawers 600x400 mm
  • 2 Steerable casters, 100 mm diameter, with locking plus axle with two rollers
  • Plastic surface with formed recesses for small parts and ergonomic handles
  • Optionally available with multiplex wood board for insertion into surface
  • Surface is highly resistant to chemicals and oil
  • Optional side flap for storing long tools
  • Maximum mobility with built-in worktop
  • Versatile functionality, protected access
  • High levels of safety and ergonomics
  • Plastic components, deep black RAL 9005 edging
  • Overall dimensions 780x580x940 mm (WxDxH)
  • Weight 66 kg
• Ring spanner set
  • Same sizes, open-ended spanner angle 15°, ring spanners angled by 15°, chrome
  • Material: Chrome-vanadium 31 CrV 3, Mat. no. 1.2208
  • Standardised to DIN 3113, shape A/ISO 3318
  • 25 Ring spanners of sizes (SW): 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 30 and 32
• Socket insert and spanner set
  • Material: Chrome-vanadium 31 CrV 3, Mat. no. 1.2208, knurled, polished
  • 1/2" square socket drives conforming to DIN 3120/ISO 1174 with ball grooves, manual, dimensions conforming to DIN 3124/ISO 2725
  • 24 socket spanner inserts, and 24 twelve-sided socket spanner inserts (for external hex screws)
    Spanner sizes 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 30, 32 and 34
  • 2 Extensions 125mm and 250mm
  • 1 Cardan joint, 1/2"
  • 1 Angled handle with slider, 1/2"
  • 1 Reversible ratchet screwdriver, 1/2"
  • Safety interlocking for securing socket spanner inserts, with release knob for quick and easy replacement of tools with wrought cog and 2-component handle
  • 1 Torque spanner, with micrometer scale, 40 to 200 Nm
  • Main unit Nm with vernier scale, secondary unit ft. lbs.
  • Tangible and audible “click”
  • Calibrated, tolerance +/-3% (exceeds standard specification of +/-4%) Classified according to DIN EN ISO 6789:2003 as type II class A, with factory certificate
• Socket insert and spanner set 1/4"
  • Knurled, chromed, polished with ball grooves/ball catches, manual
  • Material: Chrome-vanadium 31 CrV 3, Mat. no. 1.2208, bits made of chrome-vanadium 59 CrV 4, Mat. no. 1.8159
  • Square driver conforming to DIN 3120/ISO 1174, manual, dimensions as per DIN 3124/ISO 2725
  • 13 Socket spanner inserts, external hex screws (nominal sizes: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 und 14)
  • 1 Reversible ratchet spanner, wrought wheel (20 teeth), 2-component handle
  • 1 Angled handle with slider
  • 1 Handle, 2-component handle
  • 2 Extensions, lengths: 50mm and 150mm
  • 1 Cardan joint
  • 2 Connector/adapters: external square screws, 3/8" – socket square screws, 1/4", external square screws, 3/4" - socket square screws 3/8" 2
  • 7 Socket spanner inserts (for external Torx screws) - nominal sizes: 4, 5, 6, 7, 8, 9, 10 and 11
  • 4 PH screwdriver inserts (cross-head) – nominal sizes: PH1, PH2, PH3 and PH4
  • 2 PH screwdriver inserts (cross-head and Supa-Pozidrive screws) - nominal sizes: PZ1 and PZ2
  • 3 IS screwdriver inserts (slotted) - nominal sizes: 4, 5.5 and 8
  • 8 IN screwdriver inserts (hex) - nominal sizes: 2.5, 3, 4, 5, 5.5, 6, 7 and 8
  • 8 TX screwdriver inserts (TORX®) - nominal sizes: 8, 10, 15, 20, 25, 27, 30 and 40
  • 8 TXKU round-head TORX® angled screwdrivers - nominal sizes: 9, 10, 15, 20, 25, 27, 30 and 40
  • 9 IN round-head angled screwdrivers (Allen) – nominal sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10
  • 1 Torque spanner, with micrometer scale: 10 to 60Nm, 3/8" - Main unit Nm with vernier scale, secondary unit ft. lbs.
  • Tangible and audible “click”
  • Calibrated, tolerance +/-3% (exceeds standard specification of +/-4%) Classified according to DIN EN ISO 6789:2003 as type II class A, with factory certificate

• Basic VDE tool set
  • VDE tools with ribbed handles, hilt VDE insulated up to 1,000 V, conforming to EN 60900/IEC 60900:2004
  • Pliers conforming to DIN ISO 5745 and 5746
  • DE combined pliers and VDE universal side cutter, chromed, polished head, handles sheathed with 2-component plastic and VDE/EN safety insulation, inductively hardened blades, tensile strength 1600 N/mm²
  • Wire end pliers (conforming to DIN 46228, parts 1 and 4), including side cutting and stripping fittings, burnished, dipped in PVC insulation, material: special steel C 45, Mat. no. 1.0503
  • Water pump pliers
  • Wire strippers for wire cross-sections from 0.2 to 6.0 mm², automatic adjustment to wire diameter, with length adjustment from 5 - 12 mm, with side cutter for wires of up to 2 mm diam.
  • Universal cable knife for wire cross-sections from 8 to 35 mm diam., for precise, quick and easy stripping of all circular wires and cables, cuts around and along in a single move
  • Folding cable knife
  • 7 Screwdrivers
    • 4 x IS (slotted) screwdrivers in the following sizes:
      IS 60 (0.4x2.5 mm blade/60 mm length of blade)
      IS 100 (0.6x3.5/100)
      IS 100 (0.8x4.0/100)
      IS 125 (1.0x5.5/125)
    • 3 x PH (cross-head) screwdrivers in the following sizes:
      PH 1 - Length of blade 80 mm
      PH 2 - 100
      PH 2 - 150
  • 5 VDE- screwdrivers
    • 3 VDE slotted screwdrivers
      IS 75 (0.x0.). IS 106(0.x3.5). IS 12508 (0.8x5.5)
    • VDE cross-head screwdrivers, PH 1, PH 2
  • Voltage tester/screwdriver - tests up to 230 V with metal clip, lens and red plastic head, transparent, handle, blade made of nickel-coated special steel in plastic sleeve

• Socket insert set
  • Knurled, chromed, polished with ball grooves/ball catches, manual
  • Material: Chrome-vanadium 31 CrV 3, Mat. no. 1.2208, bits made of chrome-vanadium 59 CrV 4, Mat. no. 1.8159
  • 1/2" square driver conforming to DIN 3120/ ISO 1174, manual, dimensions as per DIN 3124/ ISO 2725, DIN 7422
  • Screwdriver inserts, hex (Allen key - IN) – nominal sizes: 4, 5, 6, 7, 8, 9, 10, 12, 14, 17 and 19
  • 9 Screwdriver inserts, TORX® (TX) - nominal sizes: 20, 25, 27, 30, 40, 45, 50, 55 and 60
  • 6 Socket spanner inserts, TORX®, for external TORX® screws (LTXE) - nominal sizes: 10, 12, 14, 16, 18 and 20
  • 5 Screwdriver inserts for B&S and XZN screws - nominal sizes: 8, 10, 12, 14 and 16
  • 4 Screwdriver inserts, extra long (100 mm) for B&S and XZN screws - nominal sizes: 8, 10, 12 And 14
  • 4 Round-head screwdriver inserts, extra long (140 mm) for hex screws (Allen - IN) - nominal sizes: 6, 7, 8 And 10
  • 3 Spark-plug socket spanner inserts, extra deep hex, with permanent magnets - nominal sizes 16, 18 and 20,8
  • 3 Impact socket spanner inserts with plastic sleeves for protecting hub caps, intended for fitting wheels, able to withstand use of hammer screwdriver, long, burnished and colour coded according to size - nominal sizes 17, 19 And 21
  • 5 Adapters: 1/2" to 3/4", 3/4" to 1/2", 3/8" to 1/2", 3/8" to 1/4" and 1/4" to 3/8"

• Set of files
  • Files standardised to DIN 7261, form E/ISO R 234
  • 2nd cut, cut no. 2
  • Brake calliper file, 230 mm - for disc brakes to remove brake dust and dirt from brake callipers - coarse cut, file width 14 mm, with 2-component plastic hilt
  • Semi-circular file, 1 circular file, 1 flat file, 1 triangular file - blades hammered on all sides with 2-component plastic hilt, blunt end
  • 1 File brush, wood, bristles (band 250x40 mm) made of steel wire
  • Flexible magnetic lifter 470 mm - for lifting/picking up small parts in difficult-to-reach places - flexible shaft with 2-component plastic hilt
  • Sensor gauge, with protective handle, folding - length of leaf 100 mm, conical leaf shape, polished rust-free stainless steel - leaf thicknesses: 0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 0.95 and 1 mm
  • Flat rasp for seals, for removing sealant residues - tempered steel, ground working surfaces with 2-component plastic hilt
  • 2 Flat chisels - length 150 mm, blade 18 mm, diameter 17x11 mm and length 200 mm, blade 24 mm, diameter 23x13 mm
    • For metalwork, flat-oval shaft, painted black, standardised to DIN 6453
    • Material: Chrome-vanadium 59 CrV 4, Mat. no. 1.2242, blade inductively hardened
  • 4 Punches/awls - length 150 mm, tip 40 mm, diameter of tip 3 mm, length 150 mm, tip 50 mm, diameter of tip 4 mm, length 150 mm, tip 50 mm, diameter of tip 5 mm, length 150mm, tip 50mm, diameter of tip 6 mm
    • Overall diameter 10 mm each, standardised to DIN6450, blade inductively hardened
    • Material: Chrome-vanadium 58 CrV 4, Mat. no. 1.8161, awls and surfaces ground, painted black
  • 1 Punch, ground cone and tip, painted black - material: Chrome-molybdenum, 45 CrMoV 7, Mat. no. 1.2328 – tip inductively hardened, length 120mm, tip 4mm, diameter of tip 10mm, standardised to DIN 7250