UniTrain Interface with virtual instruments (basic VI)

The UniTrain Interface is the central unit of the UniTrain system. It incorporates all inputs and outputs, switches, power and signal sources and measurement circuitry needed to perform experiments. The Interface is controlled via the connected PC.

Equipment:

• 32-bit processor with storage memory for measurements
• USB interfaces, transfer rate 12 Mbits/s
• WLAN/WiFi interface, 2.4 GHz, IEEE 802.11 b/g/n
• Simultaneous connection of any number of Experimenters via serial bus system
• High-quality designer casing with aluminium feet and surface-hardened Plexiglas front panel
• Suitable for accommodating in training panel frames for DIN A4 training panels
• Designed for connection of 2-mm safety measuring leads
• Multi-coloured LEDs for displaying status
• Adjustable analog output, +/-10 V, 0.2 A, DC – 5  MHz, via BNC and 2-mm sockets
• 4 Analog differential amplifier inputs with 10 MHz band width, safe for voltages up to 100 V, sampling rate 100 mega samples, 9 measuring ranges, memory depth 4 x 8 k x 10 bits, inputs via BNC (2 inputs) or 2-mm sockets (4 inputs)
• 2 Analog inputs for current measurement, overcurrent-protected up to 5 A, sampling rate 250 kilo samples, 2 measuring ranges, resolution 12 bits, connection via 2-mm sockets
• 3 variable analog outputs +/- 20V, 1 A, DC-150 Hz (requires CO4203-2B)
• 16-bit digital signal output, of which 8 bits are accessed via 2-mm sockets, TTL/CMOS, clock frequency 0 – 100 kHz, electric strength +/- 15 V
• 16-bit digital signal input, of which 8 bits are accessed via 2-mm sockets, memory depth 16 bit x 2 k, TTL/CMOS, sampling rate 0 – 100 kHz, electric strength +/- 15 V,
• 8 Relays, 24 V DC/1 A, of which 4 are accessed via 2-mm sockets
• Dimensions: 29.6 x 19 x 8.6 cm
• External power supply with wide range input 100-264 V, 47-63 Hz, output 24 V / 5 A
• Weight (including power supply): 2.1 kg

 

 

 

 

Virtual instruments (meters and sources):

• 2 x Voltmeter VIs, 2 x Ammeter VIs: AC, DC, 9 ranges, 100 mV to 50 V, true RMS, AV
• 1 x Power meter, 9 ranges, 100 mV to 50 V
• 1 x VI with 8 relays, 1 x Multimeter VI: multimeter display (optional LM2330, LM2331 or LM2322) in LabSoft
• 1 x 2-channel ammeter VI: AC, DC, 2 ranges, 300 mA and 3 A, TrueRMS, AV
• 1 x 2-channel voltmeter VI: AC, DC, 9 ranges, 100 mV to 50 V, TrueRMS, AV
• 1 2-/4-channel oscilloscope: band width 10 MHz, 25 time ranges, 100 ns/div to 10 s/div, 9 ranges 20 mV/div to 10 V/div, trigger and pre-trigger, XY and XT modes, cursor function, addition and multiplication function for 2 channels
• 1 x VI Spectrum Analyzer: 9 voltage ranges 100 mV to 50 V, input frequency range 3 Hz to 1 MHz, time domain display
• 1 X VI Bode-Plotter: 9 voltage ranges 100 mV to 50 V, frequency range 1 Hz - 5MHz, time domain display and locus diagram
• 1 x Adjustable DC voltage VI 0 - 10 V
• 1 x Function generator VI: 0.5 Hz - 5 MHz, 0 - 10 V, sine, square, triangular,
• 1 x Arbitrary generator VI, 1 x Pulse generator VI
• 1 x VI with 16 digital outputs, 1 x VI with 16 x digital inputs, 1 x VI with 16 digital input/outputs. Display modes: binary, hex, decimal and octal numerals
• 1 x Three-phase power supply VI, 0 - 150 Hz, 0 - 14 Vrms, 2 A (requires CO4203-2B)
• 1 x Adjustable DC power supply VI, 3 x (-20 V - +20 V), 2 A (requires CO4203-2B)
• 1 x Three-phase power supply VI with additional phase-shift and clock rate adjustment (requires CO4203-2B)

 

Includes:

• Interface
• Power supply
• Power lead
• USB cable
• Basic software (download)
• Operating manual

 

System requirements:

• Personal computer with Windows 10, Windows 11
• USB port for connection to Interface