Item No.: CO3216-2X

CAN switching interface

The CAN switching interface can be integrated into any existent, main lighting system, whose analog input signals are then converted by the interface into digital CAN messages. In combination with the CAN lighting interface, this makes it possible to set up a functional CAN node for the purpose of visualizing and measuring the fundamental parameters related to a CAN bus. The CAN messages are output via 2-mm and 4-mm safety sockets. A switch can be used to toggle the baud rate between low-speed bus and high-speed bus.

  • Baud rate adjustable between 125 kbps and 1 mbps

  • Compatible with low-speed and high-speed CAN buses (ISO 11898-2 and ISO 11898-3)

  • Operating voltage: 12 V / 13.8 V

  • Inputs: 4-mm safety sockets

  • Outputs: 4-mm and 2-mm safety sockets

  • Vehicle-specific terminal designations

  • Visual indications of bus errors

  • Continuous voltage supply via terminals 30 and 15 in the upper section

  • Continuous ground via terminal 31 in the lower section

  • Coloured screen print

  • Dimensions: 297 x 114 x 60 mm

  • Weight: 1.0 kg