Mobile aluminum experiment stand, 3 levels, power strip with 6 sockets,(1250 x 1970 x 700 mm)

High-quality mobile experiment and demonstration trolley from the SybaPro range featuring aluminium table legs and low-level shelf.
This trolley is suitable for mounting under-table cabinets and is compatible with all add-ons and extensions in the SybaPro range.

It is supplied with one shelf, an angle bracket for attaching a PC and a cable holder.

Table top + Shelf:

• 30-mm table top made of highly compressed, multi-layer fine chipboard conforming to DIN EN 438-1
• Colour grey, RAL 7035, with 0.8-mm slightly textured laminate coating (Resopal) on both sides, conforming to DIN 16926
• Resistant to many chemicals and reagents including dilute acids and alkalis
• Resistant to heat, e.g. molten solder or heating at specific points such as by soldering tips or cigarette ends
• Frame with solid impact-resistant protective edging made of 3 mm thick RAL 7047 coloured plastic
• Coating and adhesive are PVC free
• Power strip with 6 outlet sockets mounted underneath the table top, lead and earthed plug

Frame:

• 2 extruded aluminium profiles with multiple grooves 1800 x 120 x 40 mm (WxHxD)
• 8 equally sized grooves in extruded aluminium profiles (3 on each side and 1 each on the front and back)
• Grooves accommodate standard industrial mountings
• 4 H-shaped aluminium profiles, 1150 mm, for 3-layer organisation of DIN A4 panels
• Space for extension of power supply duct
• Base made of rectangular tubing with 4 swiveling double casters, 2 of which have brakes
• Table frame made of tough combination of rectangular tubing around the full perimeter
• Acid-resistant epoxy-resin coating, 80 µm thick (approx.), colour RAL 7047

Cable holder: 

• Width 200 mm with 12 cable slots to accommodate 48 x 4-mm safety measurement leads

PC attachment bracket:

• With 3 screw-on rubber stoppers, dimensions 65x65x114 mm approx. (top fixing for PC)

> The height of the cable holder and PC attachment bracket can be adjusted along the aluminium profiles
> For attachment to left or right, fastening materials included
> Acid-resistant epoxy-resin powder coating of thickness 80 µm approx., colour RAL 7047

Dimensions:

• Height of table top 760 mm
• 1250 x 1970 x 700 mm (WxHxD)
• The mobile experiment stand will be delivered fully assembled.